撥動世界 智造未來
小型化電子零部件制造廠家
專注?撥動開關研發生產 · 十年行業經驗
新聞資訊 / NEWS
16年—撥動開關廠家經驗
Focused On Toggle Switch
東莞市穎鑫電子科技有限公司為你詳細介紹:撥動開關規格書,撥動開關技術參數,撥動開關生產注意事項!
東莞市穎鑫電子科技有限公司規格書
SPECIFICATION |
||||||||||
DESIGNATION 系列:撥動開關 | ||||||||||
MODULE NO. 型號: | ||||||||||
1. RATING 額定值: 0.3A DC 50V | ||||||||||
2. CIRCUIT 回路: 1P 2T | ||||||||||
3. TIMING 切換類型: S(SHORTING)/ Non-shorting | ||||||||||
4. STANDARD TEST CONDITIONS SHALL BE 5 TO 35℃ IN TEMPERATURE AND 45 TO 85% IN HUMIDTY. |
||||||||||
溫度5-35℃,濕度45-85%標準狀態下測試. | ||||||||||
5. OPERATING TEMPERE RANGE -- 10 TO 60℃ | ||||||||||
溫度-10~60℃環境內使用. | ||||||||||
ITEM 項目 | TEST CONDISTION 測試條件 | PERFORMANCE 規格 | ||||||||
6. ELECTRONICAL PERFOORMANCE 電氣性能 | ||||||||||
6.1 |
CONTACT RESISTANCE 接觸阻抗 |
Being measured at 1kHz small current contact resistance meter. 在1KHz小電流下測量 |
30MΩ max. 30毫歐以下. |
|||||||
6.2 |
INSULATION RESISTANCE 絕緣阻抗 |
Measurements shall be made following application of DC 500V potential across terminals and across terminals and frame for 1 minrte. 在端子之間和端子與殼之間加DC 500V 條件下, 持續1分鐘測量. |
100MΩmin.. 100毫歐以上 |
|||||||
6.3 |
WITHSTAND VOLTAGE 耐電壓 |
AC 500V(50Hz or 60Hz)shall be applide across terminals and acoss teminals and frame for one minrte 在端子之間和端子與殼之間加AC 500V (50Hz或60Hz)條件下,持續1分鐘表測量. |
There shall be no breakdown. 無擊穿現象出現. |
|||||||
7. MECHANICAL PERFORMANCE 機械性能 | ||||||||||
7.1 |
OPERATING FORCE 動作力 |
MEASURE AT THE POINT 3mm FROM THE TIP OF THE ACTUATOP (KNOB) 在距離推桿前端3mm作測定點. |
250gf±50gf | |||||||
7.2 |
TERMINAL STRENGTH 端子強度 |
A static force of 500gf being applied in one direction the tip of the terminal for 1 minute. 一個500克之靜電負荷施加于端子頂部的一個方向 持續1分鐘. |
There shall be no sign of damage mechanically and electrically. 無任何跡象顯示機械及 電器性能之損壞. |
|||||||
7.3 |
ACTUATOR STRENGTH 推桿強度 |
A static load of 1kgf being applied in one direction of actuator for one min. 一個1公斤靜負荷施加于推桿之一個方向持續 1分鐘. |
The defromation shall not be extrene and the actuator shall machanically work normally 推桿無變形,可以正常操作 |
|||||||
穎鑫官方微信